Contact Advantech Search Shopping list
  1. 1-888-576-9668
  2. Login
Order By Part Number
Home I/O Devices & Communication Industrial Communication

Industrial Communication

Advantech’s Industrial Communications solutions not only reliably connect sensors and I/O devices from field sites and factories, but provide an Ethernet backbone to integrate switches and device servers in real time. Choose from the categories below to make your industrial network bulletproof.
Results per page 2040 | Sort by Price Highest / Lowest / Latest
Page 12 of 15
BB-485OPDRI-PH
RS-422/485 Isolated extender, Heavy Industrial
  1. IEEE-61850-3, IEEE-1613
  2. NEMA TS2
  3. -40 to 85°C Operating Temperature
  4. Rugged IP30 Metal Panel Mount Case
  5. 50G Shock, 4G Vibration
  6. 2kV Triple Isolation
  7. 10 to 48 VDC Input Power

$336.00

Compare View More
BB-9POP4
Serial Isolator, RS-232 Data and Control Signals, DB9 F, DB9 M
  1. 2.5kV isolation
  2. 15kV ESD protection
  3. Data rate: 230.4 kbps
  4. Quick in-line installation
  5. 12 VDC Power supply required, sold separately

$112.90

Compare View More
BB-9SPOP2
Serial Isolator, RS-232 Data Signals, DB9 F, DB9 M, Port Powered
  1. 2.5 KV Isolation
  2. Data rates up to 115.2 kbps
  3. DB9 F / DB9 M
  4. Port-powered on both sides, no external power supply required

$95.00

Compare View More
BB-232HESP
Serial Surge Protector, RS-232 Data Line, 3 Stage
  1. Three stages of protection on every data line: 1)Gas discharge tube, 2)Series resistor, 3)Transient voltage suppressor
  2. Protected signal ground connection
  3. Five Postion Terminal Block
  4. Dedicated chassis ground lug

$164.00

Compare View More
BB-422HESP
RS-422 HIGH ENERGY SURGE Protector
  1. Three stages of protection on every data line: 1) Gas discharge tube 2) Series resistor 3) Transient voltage suppressor
  2. Protected signal ground connection
  3. Rugged terminal block connections
  4. Dedicated chassis ground lug

$164.00

Compare View More
BB-485FPP
Serial Surge Protector, RS-422/485 Data Line, Fused
  1. Protects RS-422 or RS-485 ports
  2. 600W serial circuit surge suppression
  3. 125 mA fast-acting PCB fuses
  4. Simple in-line installation
  5. One time use, disposable unit

$83.00

Compare View More
BB-485HESP
RS-485 HIGH ENERGY SURGE Protector
  1. Three stages of protection on every data line: 1) Gas discharge tube 2) Series resistor 3) Transient voltage suppressor
  2. Protected signal ground connection
  3. Rugged terminal block connections
  4. Dedicated chassis ground lug

$148.00

Compare View More
BB-CANOP
Serial Isolator, CAN, TB
  1. Boost signals and increase node capacity of CAN networks
  2. Works with various CAN protocols and frame lengths
  3. 2,000V optical isolation protection from surges and spikes
  4. Data rate: up to 250 kbps (bit-wise enable)
  5. Terminal block CAN connections (copper)
  6. DIN rail mount enclosure - ideal for industrial cabinets
  7. 10-30 VDC external power required (not included, sold separately)

$187.00

Compare View More
BB-HESP4DR
RS-422/485 Dataline Surge Suppressor
  1. Three stages of protection on every data line: Gas discharge tube, Series resistor, Transient voltage suppressor
  2. Protected signal ground connection
  3. Rugged terminal block connections
  4. Dedicated chassis ground lug
  5. Wide operating Temperature
  6. NEMA TS2

$119.00

Compare View More
EKI-1242IECMS-A
Modbus to EtherCAT Gateway Wide Temperature
  1. Seamless integrate Modbus RTU/TCP and EtherCAT communication
  2. Built-in real time diagnostic to increase highly efficiency of device management
  3. Designed for protocol extensibility and adaption
  4. Modbus TCP Client mode supports 64 connections
  5. Supports dual power input for power redundancy
  6. Mounts on DIN-rail and Wall mount

$782.00

Compare View More
EKI-1242IEIMS-A
Modbus to EtherNet/IP Gateway with Wide Temp.
  1. Seamless integrate Modbus RTU/TCP and EtherNet/IP communication
  2. Built-in real time diagnostic to increase high efficiency of device management
  3. Designed for protocol extensibility and adaption
  4. Modbus TCP Client mode supports 64 connections
  5. Supports dual power input for power redundancy
  6. Mounts on DIN-rail and Wall mount

$655.70

Compare View More
BB-UH104
4-port High Retention USB High Speed Hub
  1. High Retention USB Connectors
  2. 15 kV ESD Protection
  3. Rugged Panel Mount Case
  4. Wide Operating Temperature (-40 to 80°C)
  5. USB 2.0 – High Speed (480 Mbps)

$143.00

Compare View More
BB-UHR204
USB 2.0 Hub, 4 Port, Industrial
  1. High Retention USB Connectors
  2. Level 4 ESD Protection – 15kV
  3. Rugged Metal Case – Panel & DIN Rail Mount
  4. Wide Operating Temperature (-40 to 80°C)
  5. USB 2.0 – High Speed (480 Mbps

$308.00

Compare View More
BB-UHR207
USB 2.0 Hub, 7 Port, Industrial
  1. High Retention USB Connectors
  2. ESD Protection – 15 kV Air
  3. Rugged Metal Case
  4. Wide Operating Temperature (-40 to 80°C)
  5. USB 2.0 – Refer to Specification Table
  6. Panel Mount Brackets & DIN Rail clip

$356.00

Compare View More
BB-UHR307
USB 2.0 Hub, Isolated, 7 Port, Industrial
  1. 4 kV Isolation
  2. High Retention USB Connectors
  3. ESD Protection – 15 kV Air
  4. Rugged Metal Case
  5. Wide Operating Temperature (-40 to 80°C)
  6. USB 2.0
  7. Panel Mount Brackets & DIN Rail clip

$416.00

Compare View More
BB-UHR401
USB TO USB 1 PORT ISOLATOR - 4KV, RUGGED
  1. 4 kV Isolation
  2. High Retention USB Connectors
  3. ESD Protection – 15 kV Air
  4. Heavy Duty Case – Panel Mount or optional DIN rail adaptor clips
  5. USB 2.0 – Full Speed

$202.00

Compare View More
BB-USBHUB4OEM
4 PORT USB HUB, OEM MODULE
  1. High-retention USB Port Connectors
  2. Ultra-compact, Open Bare-board Design
  3. ESD Protection - 8 kV Contact, 15 kV Air
  4. -40 to 80 °C Operating Temperature
  5. Powered from USB Host
  6. USB 2.0
  7. Installs as an unbranded USB Hub

$153.30

Compare View More
BB-USH204-B
ULI-414H, 4-port Industrial USB 3.2 Gen 1 Hub
  1. USB 3.2 Gen1 speeds up to 5 Gbps
  2. Expands one USB port to 4 USB ports
  3. 4 downstream USB 3.2 ports (Type A); 1 upstream USB 3.2 port (Type B)
  4. Each downstream port supports up to 2.4A to a maximum of 27W
  5. 15 kV air ESD protection and 1kV surge protection
  6. 9-30VDC Power inputs with polarity reverse protection
  7. Metal case with chassis ground
  8. DIN-rail, wall-mount and desktop mount options (mounting kit included)
  9. USB 3.0 Type A to Type B cable (2m) included

$156.00

Compare View More
BB-USH207-B
ULI-417H, 7-port Industrial USB 3.2 Gen 1 Hub
  1. •7-port USB 3.2 Gen1 speeds up to 5 Gbps
  2. •7 downstream USB 3.2 ports (Type A); 1 upstream USB 3.2 port (Type B)
  3. • Each downstream port supports up to 2.4A to a maximum of 42W
  4. •15 kV (level 4) air ESD protection and 1kV surge protection
  5. •9-30VDC Power inputs with polarity reverse protection
  6. • Metal case with chassis ground
  7. •DIN-rail, wall-mount and desktop mount options available (mounting kit included)
  8. •USB 3.0 Type A to Type B cable (2m) included

$199.00

Compare View More
BB-UH401
1-port High Retention USB 4KV Isolator
  1. 15 kV ESD Protection
  2. -40 to 80°C Operating Temperature
  3. High Retention USB Connectors
  4. Ultra-Compact
  5. USB Bus Powered
  6. USB Cable Included

$143.00

Compare View More
Page 12 of 15
x
Contact Us

1-888-576-9668

8 am- 8 pm (EST) Mon-Fri

Contact Advantech