Contact Advantech Search Shopping list
  1. 1-888-576-9668
  2. Login
Order By Part Number
Home Boards & Cards Motion Control PC Bus Cards Distributed Motion Control Solution
Results per page 2040 | Sort by Price Highest / Lowest / Latest
Page 1 of 1
APAX-5080-AE
4/8-channel High Speed Counter Module
  1. Supports multiple operating modes: 1.Up mode 2.Up/Down mode 3.Pulse/Direction mode 4.A/B Phase mode 5.Frequency mode
  2. 4 or 8 counter channels depends on operating modes
  3. 32-bit counter range with 1 bit overflow/underflow
  4. 1 MHz counter frequency
  5. 4 digital input channels with counter gate functionality
  6. 4 digital output channels with counter alarm output functionality
  7. Over voltage, short circuit and thermal protection design

$314.00

Compare View More
AMAX-1220-AE NEW
Open Frame 2-Axis Motion Module
  1. End limit logic is switchable (high or low active)
  2. BoardID is switchable
  3. Easily visible LED indicators on board to do diagnosis.
  4. Direct wire to servo drive to save terminal board space while installation.
  5. Max. 6.5 MHz, 4-axis pulse output
  6. 28 bits counter for incremental encoder
  7. Horizontal installation for for servo or stepping motor driver
  8. Suitable for DIN-rail mounting

$468.00

Compare View More
AMAX-1240-AE NEW
Open Frame 4-Axis Motion Module
  1. End limit logic is switchable (high or low active)
  2. BoardID is switchable
  3. Easily visible LED indicators on board to do diagnosis
  4. Direct wire to servo drive to save terminal board space while installation
  5. Max. 6.5 MHz, 4-axis pulse output
  6. 28 bits counter for incremental encoder
  7. Horizontal installation for for servo or stepping motor driver
  8. Suitable for DIN-rail mounting

$732.00

Compare View More
AMAX-1752-AE
CIRCUIT BOARD, Open Frame 32-channel Isolated Digital Input Module
  1. Communication baud rate, 2.5Mbps, 5Mbps, 10Mbps and 20Mbps are supported and switchable.
  2. Onboard screw terminal for direct wiring
  3. 2,500 VRMS Isolation voltage
  4. Suitable for DIN-rail mounting
  5. BoardID is switchable
  6. Easily visible LED indicators on board to do diagnosis.

$246.00

Compare View More
AMAX-1754-AE
CIRCUIT BOARD, Open Frame 32-channel Isolated Digital Output Module
  1. Communication baud rate, 2.5Mbps, 5Mbps, 10Mbps and 20Mbps are supported and switchable.
  2. Onboard screw terminal for direct wiring
  3. 2,500 VRMS Isolation voltage
  4. Suitable for DIN-rail mounting
  5. BoardID is switchable
  6. Easily visible LED indicators on board to do diagnosis.

$246.00

Compare View More
AMAX-1756-AE
CIRCUIT BOARD, Open Frame 16-channel Isolated Digital Input/16-channel Digital Output Module
  1. Communication baud rate, 2.5Mbps, 5Mbps, 10Mbps and 20Mbps are supported and switchable.
  2. Onboard screw terminal for direct wiring
  3. 2,500 VRMS Isolation voltage
  4. Suitable for DIN-rail mounting
  5. BoardID is switchable
  6. Easily visible LED indicators on board to do diagnosis.

$246.00

Compare View More
PCI-1202U-AE
2-port AMONet RS-485 Client Card
  1. Max. 20 Mbps transfer rate
  2. 2 independent AMONet RS-485 Client Rings
  3. Max. 128 AMONet RS-485 server modules supported
  4. Programmable digital input to notify events
  5. Easy installation with RJ45 phone jack and LED diagnostic

$418.00

Compare View More
AMAX-3285IO-AE
8-axis EtherCAT Motion Server Module with 16DI/16DO
  1. Max. 5 MHz, 8-axis pulse output
  2. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  3. BoardID is switchable
  4. Easily visible LED indicators on board to do diagnosis
  5. Direct wire to servo drive to save terminal board space while installation
  6. Horizontal installation for for servo or stepping motor driver
  7. Suitable for DIN-rail mounting
  8. Programmable interrupt
  9. Memory buffer (10K points) for trajectory planning which is designed in DSP

$669.00

Compare View More
PCI-1203-06AE
2-port 6-Axis EtherCAT Universal PCI Client Card
  1. 650MHz dual-core ARM processor
  2. 2 x EtherCAT ports for high-performance of Motion and I/O applications
  3. Supports common motion SDK for rapid application development
  4. Up to 32 axes support for motion control
  5. Supports a maximum of 6 motion groups and 8 axes per group
  6. Supports on board 8-CH isolated DI and 4-CH isolated DO
  7. Diagnostics for fast error handling can trace command and error message

$684.00

Compare View More
Page 1 of 1
x
Contact Us

1-888-576-9668

8 am- 8 pm (EST) Mon-Fri

Contact Advantech