Display
Smart Display Port 2.0*
12V/2A power output for TREK displays
1 x high-resolution video, 1 x audio signal, 1 x USB 2.0
1 x power button and 1 x reset button (via the smart display)
(the SDP settings are configurable via MRM SDK)
I/O
CCMOS Button
1 x Clear CMOS button (front accessible with key-lock protection)
I/O
Generic I/O 2.0 (via generic I/O cable)
2 x 4-wire RS-232 (default)/RS-485
2 x 2-wire RS-232
6 x isolated DI (dry/wet), 4 x isolated DO
2 x line-out, 2 x mic-in
I/O
LED Indicators
5 x LED, Power (red), Storage (yellow), WLAN (green), WWAN (green), and GPS (yellow)
I/O
Power Button
Via second-generation TREK display; system configured to wake-on-ignition as default
I/O
Reset button
1 x Reset button (front accessible with key-lock protection)
I/O
Standard I/O
1 x USB 3.0 Type A (front accessible with key-lock protection)
2 x USB 2.0 Type A
2 x Giga LAN (with optional locking mechanism, or M12 connector)
I/O
VIO2.0 (via VIO cable)
1 x ignition and power input
1 x J1708 (supports J1587)
2 x CAN bus; compliant with J1939, OBD-II/ISO-15765 specifications; supports both 11-bit (CAN 2.0A) and
29-bit (CAN 2.0B) identifiers; high-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s;
configurable via MRM SDK
Storage
Micro SD Card (upon request)
NA
Mechanical
Dimensions (W x H x D)
314 x 165.5 x 75.1 mm/12.36 x 6.51 x 2.95 in
Mechanical
Weight
4.2 kg/9.25 lb (excludes SSD)
Core
Graphic
Integrated 2D/3D graphics engine
Core
Memory
2 x SODIMM, up to 32 GB DDR4 2133 non-ECC memory
(with dual channel support)
Core
Processor
Intel® Core™ i7-7600U dual-core, 3.9 GHz
Sensors
_
1 x g-sensor and gyroscope
Environmental
EMC
CE, FCC, RCM, CCC
Environmental
IP Rating
IP65 (excludes rear I/O) (optional IP65-rated M12 system I/O cover available upon request)
Environmental
Operating Temperature
-30 ~ 70 °C/-22 ~ 158 °F (Atom™ X5-E3940), -20 ~ 50 °C/-4 ~ 122 °F (Core™ i7/i5)
(-20 ~ 60 °C/-4 ~ 140 °F available upon request)
Environmental
RF Regulation
CE (RED), FCC ID, IC ID
Environmental
Shock / Vibration
MIL-STD-810G, EN60721-3(5M3)
Environmental
Storage Temperature
-40 ~ 80 °C/-40 ~ 176 °F
Environmental
Vehicle Regulation
E-Mark (E13), SAE J1455, ISO 7637-2, SAE J1113
Power Supply
Input Voltage
12/24 V vehicle power (6 ~ 32 VDC input) (ISO 7637-2 and SAE J1113 compliant)
Power Supply
Intelligent Vehicle Power Management (iVPM 2.0)
System power on/off/hibernate management (programmable ignition on/off/delay)
PoE power total/on/off management (via MRM SDK)
Supports wake-up events: wake-on-alarm (RTC), wake-on-call/SMS, and wake-on-G-sensor
System power protection (vehicle battery low-voltage protection)
System monitoring and diagnostics
I/O (Via Orin NX)
Display
HDMI (Max. resolution 3840 x 2160 @ 60Hz)
I/O (Via Orin NX)
OTG USB
1 x Micro USB
I/O (Via Orin NX)
PoE
4 x RJ-45 for 10/100 Base-T(X) PoE, 802.3af/at compliant
Power output shared by all cameras/devices is limited to 30W
Supports PoE power control and Ethernet management1 (via MRM SDK)
I/O (Via Orin NX)
USB
1 x USB 3.0 Type A
Develop Tools (Via Orin NX)
SDK
JetPack 5.1
Processor (Via Orin NX)
CPU
NVIDIA® Jetson Orin™ NX 8GB : 6-core Arm® Cortex®-A78AE
Processor (Via Orin NX)
GPU
1,024-core NVIDIA Ampere architecture GPU with 32 Tensor Cores
Processor (Via Orin NX)
Memory
NVIDIA® Jetson Orin™ NX 8GB: 8GB 128-bit LPDDR5102.4GB/s
Processor (Via Orin NX)
Storage
1 x internal M.2 NVMe 128G 3D TLC (industrial-grade storage)
Operating System (Via Orin NX)
Linux
Ubuntu 20.04/ JetPack 5.1 above
RF (WLAN/WWAN via RF extension)
Antenna
5 x FAKRA connectors for 1 x GPS (C-code), 2 x Wi-Fi + Bluetooth (I/Z-code), 2 x WWAN/LTE(D/L-code) with Wi-Fi/WWAN MIMO support
RF (WLAN/WWAN via RF extension)
GPS
Built-in u-blox Neo-M8N supports concurrent reception of up to 3 GNSS (GPS, Galileo, GLONASS, BeiDou)
2.5-meter accuracy, GPS management (via MRM SDK)
Optional Neo-M8U/Neo-M8L (dead reckoning) available upon request
RF (WLAN/WWAN via RF extension)
WLAN/Bluetooth
NA
RF (WLAN/WWAN via RF extension)
WWAN
NA
