Serial Device Servers

The serial device servers enable RS-232/422/485 serial devices to be connected to a host computer over an Ethernet network quickly and cost-effectively. No extra programming effort is required at the host computer, drastically cutting software development costs. Serial device servers are especially suitable for remotely controlling and monitoring your serial devices via the Ethernet.

Communication Controller

Serial Device Servers & Modbus Gateways

USB to Serial Converters

Part Number

Display

Connector

Protection

Serial

Software

System

Ethernet Interface

Serial Interface

Software (uClinux)

Interface -All-USB 1.1

Serial -All-Screw Tterminal

USB -All-Type B

Surge -All-3000 VDC

Isolation -All-3000 VDC

Ports -All-1

Type -All-RS-232/422/485

Baud Rate -All-50 ~ 115.2 Kbps

Driver -All-Windows 2000/XP

CPU -All-ARM7 32-bit RISC...

Flash -All-8 MB

SDRAM -All-16 MB

OS (pre-installed) -All-uClinux

LAN -All-2 x auto-sensing...

Connector -All-RJ-45

Serial Standards -All-Software selectab...

Connector -All-D-sub 9 male

Kernel Version -All-2.4.31

Protocol Stack -All-TCP, UDP, IPv4, I...

Price

EKI-1122L-AE

ARM7 32-bit RISC CPU, 80 MHz

8 MB

16 MB

uClinux

2 x auto-sensing 10/100 Mbps ports

RJ-45

Software selectable RS-232/422/485 ports

D-sub 9 male

2.4.31

TCP, UDP, IPv4, ICMP, ARP, SNMP V1, HTTP, DHCP, NTP, NFS, SMTP, Telnet, FTP, PPP, PPPoE

$325

EKI-1121L-AE

ARM7 32-bit RISC CPU, 80 MHz

8 MB

16 MB

uClinux

2 x auto-sensing 10/100 Mbps ports

RJ-45

Software selectable RS-232/422/485 ports

D-sub 9 male

2.4.31

TCP, UDP, IPv4, ICMP, ARP, SNMP V1, HTTP, DHCP, NTP, NFS, SMTP, Telnet, FTP, PPP, PPPoE

$260

ADAM-4561-BE

USB 1.1

Screw Tterminal

Type B

3000 VDC

3000 VDC

1

RS-232/422/485

50 ~ 115.2 Kbps

Windows 2000/XP

$140