Contact Advantech Search Shopping list
  1.  
  2. 1-888-576-9668
  3. Login
Order By Part Number

PCI

Motion control cards using the PCI bus
Results per page 9 18 | Sort by Price Highest / Lowest / Latest
Page 1 of 2
PCI-1202U-AE
2-port AMONet RS-485 Master Card
  1. Max. 20 Mbps transfer rate
  2. 2 independent AMONet RS-485 Master Rings
  3. Max. 128 AMONet RS-485 slave modules supported
  4. Programmable digital input to notify events
  5. Easy installation with RJ45 phone jack and LED diagnostic

$510.00

Compare More
PCI-1203-06AE
2-port 6-Axis EtherCAT Universal PCI Master Card
  1. 650MHz dual-core ARM processor
  2. 2 x EtherCAT ports for high-performance of Motion and I/O applications
  3. Supports common motion SDK for rapid application development
  4. Up to 32 axes support for motion control
  5. Supports a maximum of 6 motion groups and 8 axes per group
  6. Supports on board 8-CH isolated DI and 4-CH isolated DO
  7. Diagnostics for fast error handling can trace command and error message

$721.00

Compare More
PCI-1220U-AE
2-axis Stepping/Pules-type Servo Motor Card
  1. Independent 2-axis motion control
  2. Hand wheel and jog function
  3. 2-axis linear interpolation function
  4. 2-axis circular interpolation function
  5. Continuous interpolation function
  6. Programmable T/S-curve acceleration/deceleration rate
  7. Up to 4 Mpps output for each axis
  8. Two pulse output types: CW/CCW or pulse/direction
  9. Up to 1 MHz encoder input for each axis

$670.00

Compare More
PCI-1243U-AE
4-Axis Low Cost Stepping Motor Control Card
  1. 4 axis stepping motor control
  2. PCI universal bus
  3. Up to 400 k pulse output rate
  4. T-curve acceleration/deceleration
  5. Pulse/Dir and CW/CCW pulse output mode
  6. Up 24-bit step count
  7. Opto-Isolated Digital input and output
  8. Up to 1,500 Vrms system isolation
  9. BoardIDTM switch

$386.00

Compare More
PCI-1245-AE
Standard 4-Axis DSP-Based SoftMotion Controller
  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  2. Pulse output up to 5 Mpps
  3. Memory buffer (10K points) for trajectory planning which is designed in DSP
  4. Supports E-Gear, and helical interpolation
  5. Supports E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP
  6. Hardware emergency input
  7. Watchdog timer
  8. Position latch via ORG & index signal
  9. Position compare triggering up to 100 KHz, and memory buffer is up to 100 K points in DSP

$870.00

Compare More
PCI-1245E-AE
Economic 4-Axis DSP-Based SoftMotion Controller
  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  2. Pulse output up to 5 Mpps
  3. Memory buffer for trajectory planning (circular trajectory and auto blending are not supported)
  4. Supports E-Gear
  5. Hardware emergency input
  6. Watchdog timer
  7. Position latch via ORG & index signal
  8. Programmable interrupt

$567.00

Compare More
PCI-1245L-AE
Basic 4-Axis SoftMotion Controller
  1. Encoder input is 4 MHz for 4xAB mode, 1 MHz for CW/CCW mode
  2. Pulse output up to 1 Mpps and the output type can be switched to differential or single-end by jumper setting
  3. Supports 2 axis linear interpolation
  4. Supports T/S-curve
  5. Supports speed override
  6. Hardware emergency input
  7. Watchdog timer

$309.00

Compare More
PCI-1265-AE
Standard 6-Axis DSP-Based SoftMotion Controller
  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  2. Pulse output up to 5 Mpps
  3. Memory buffer (10K points) for trajectory planning which is designed in DSP
  4. Supports E-Gear, and helical interpolation
  5. Supports E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP

$1,025.00

Compare More
PCI-1285-AE
8-Axis DSP-Based SoftMotion Controller PCI Card
  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  2. Pulse output up to 5 Mpps
  3. Memory buffer (10K points) for trajectory planning which is designed in DSP
  4. Supports E-Gear, and helical interpolation, E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP
  5. Watchdog timer, Position latch
  6. Position compare triggering up to 100 KHz, and memory buffer is up to 100 K points in DSP
  7. Supports gantry mode by semi-closed loop pulse train control
  8. RDY/LTC-dedicated input channels & SVON/CMP/CAM-DO/ERC-dedicated output channels are switchable for general input and output purposes

$1,190.00

Compare More
Page 1 of 2
x
Contact Advantech

1-888-576-9668

8 am- 8 pm (EST) Mon-Fri

Contact Advantech